Instructions and help

In the Indicator view, you can view one indicator and compare several operators.
In the Operator view, you can view one operator and compare several indicators.
In the Operator view (advanced), you can view one or several operators and compare one or several indicators.

For displaying a particular indicator in the table with selected criteria, please follow the procedure as described below. To confirm the change to the selected criteria and to display the appropriate chart and table, please click the “FILTER” button.

Indicator view

Categories

To display a particular chart and table, first select the required criteria in Categories (e.g. fixed telephone services, mobile telephone services or other).  If no criterion is selected from Categories, the Indicators and Values fields shall remain disabled and grey. Note: The default selection Category is “Penetration”. Changing the Category can be done in one of two ways:

  1. By removing the blue checkbox to the right from the category name by clicking on the coloured checkbox or on the grey checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Indicators

After successfully selecting the category, the next step is selecting an individual indicator. If no indicator is selected, the Values field shall remain disabled and grey. Note: The default selection Indicator is “Broadband fixed penetration”. Changing the indicator can be done in one of two ways:

  1. By removing the blue checkbox to the right from the indicator name by clicking on the coloured checkbox or on the grey checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Values

After successfully selecting the indicator, the next step is selecting individual values to be displayed in the chart and the table using the Values field. If no specific value is selected, all the values of the selected indicator shall be displayed. Note: No value is selected by default, so all the values for the selected indicator will be displayed. Changing the value can be done in one of two ways:

  1. By removing the blue checkbox to the right from the value by clicking on the coloured checkbox or on the grey checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Operator view

Operators

When viewing by individual operator, only those indicators are displayed in a category that can be compared (e.g. operator’s different market shares). Individual indicators from different categories cannot be compared.

To display the appropriate chart and table, first select the desired criterion (one of the operators) in the Operator view. If no criterion was selected in the Operator view, the Categories and Indicators fields shall remain disabled and grey. Note: In the Operator view the default selection is Telekom Slovenije. Changing the criterion can be done in one of two ways:

  1. By removing the blue checkbox to the right from the indicator name by clicking on the coloured checkbox or on the grey checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Categories

After successfully selecting the operator, the next step is selecting an individual Category. If no criterion is selected from Category, the Indicators field shall remain disabled and grey. Note: In the Category the default selection is “Fixed broadband internet access”. Changing the Category can be done in one of two ways:

  1. By removing the blue checkbox to the right from the indicator name by clicking on the coloured checkbox or on the grey checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Indicators

After successfully selecting the Category, the next step is selecting several indicators in this Category. Note: No value is selected by default, so all the values for the selected Category will be displayed. Changing the value can be done in one of two ways:

  1. By removing the blue checkbox to the right from the indicator name by clicking on the coloured checkbox or on the grey checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Operator view (advanced)

Operators

In advanced view you can select one or several operators you wish to compare.
The graphical view will be unreadable if you select too many indicators (especially in the Operators (advanced) view).

To display the desired chart and table, first select the desired criterion (one or several operators) in the Operator view (advanced). If no criterion was selected in the Operator view (advanced), the chart and table displays all of them. Note: In the Operator view (advanced) the default selection is Telekom Slovenije. Changing the criterion can be done in one of two ways:

  1. By removing the blue checkbox to the right from the operator name by clicking on the colored checkbox or on the gray checkbox.
  2. By clicking the “RESET” button, which resets the whole filter.

Indicators

After successfully selecting desired operators, the next step is selecting a several indicators. Note: No value is selected by default, so all the values for the “Fixed broadband internet access” Category will be displayed. Changing the value can be done in one of two ways:

  1. Remove the blue checkbox to the right from the name of an individual indicator by clicking on the colored checkbox or in the gray field.
  2. By clicking the “RESET” button, which resets the whole filter.

Total

Period

In the Period field, you can set the start and end dates to determine the period (year or quarter) for which particular data set will be displayed based on the previously selected criteria. 

If you select an annual view of the graph, the graphs in which the values ​​are expressed in percentages will show the values ​​of the last quarter of each year. Where values ​​are expressed in figures, the values ​​of the sum of all the quarters of each year are shown.

If you choose an annual view of the graph including a year that has not yet been completed, values for that year are not displayed.

View

You can switch between the quarterly and yearly view.

If you select an annual view of the graph, the graphs in which the values ​​are expressed in percentages will show the values ​​of the last quarter of each year. Where values ​​are expressed in figures, the values ​​of the sum of all the quarters of each year are shown.

Expanding an individual section of values on the chart

You can expand an individual section of values on the chart by holding the left mouse button and dragging the blue checkbox to the desired area.

This can be changed at any moment by clicking on the “Reset expansion” button.

Sorting the values in the table below the chart

With some indicators a table is displayed below the chart. The values in such a table can be sorted by value in individual columns. Sort values by clicking on the name of the column. A blue arrow appears on the selected column, indicating whether the value is increasing or decreasing.

The default sorting is for the first column – indicator names.

Additional notes

Displayed number on the Y axis in 600k format means 600,000.

In the legend of a particular graph, it is possible to choose (add or remove) individual values by clicking on a single value (eg. operator name or technology, etc.).

In the case of graphs showing trends of the number of connections or users or bundles etc., the application uses the polynomial regression function and shows approximations of absolute data values.